FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
10
This instruction manual complies with the Treestand Manufacturers Association’s Standard Test Method for Treestand Fall Arrest Systems.
NOTE:
When installed correctly the outer end
of the foot section should be tilted slightly
upward. This will allow the stand to level
itself as you climb and as the tree trunk
gradually narrows. Repeat step to attach the
seating platform. (Fig 3)
STEP 4.
After you properly put on the full-
body fall arrest harness provided, attach
the tree tether to the tree at eye level. With
the safety harness tether placed over either
shoulder carefully step onto the middle of the
standing platform.
STEP 5.
Next, slide your feet under the foot
straps (Fig. 4). Then slide the tree tether up
the tree as high as you can reach.
STEP 6.
Grasp the sides of the stand by the
Seat Section support and lift the seating
platform to just below waist height. Then
set the seating platform to the tree making
sure that the cable and bark biters are firmly
contacting the tree. (Fig. 5)
STEP 7.
With all your weight on the climbing
seat of the seating platform, turn feet
downward slightly to free the standing
platform from the tree. Pull the standing
platform up to a comfortable level by
bending your knees and raising your
legs up. Set the standing platform
to the tree making sure that the
cable and the bark biters are firmly
contacting the tree. (Fig. 6)
STEP 8.
Ease your weight back
onto the standing platform, stand,
and slide the tree tether up the
tree as far as possible. Repeat this
sequence until you reached your
desired height. (Fig. 7)
STEP 9.
Once you have reached your
desired climbing height, pull the tag
ends (loose ends) of the security
straps to tighten both straps. By
doing so, you lock the seating and
standing platforms to the tree.
Содержание X-scape XSCT344
Страница 1: ......
