Version 4 (January 2021) EN
5
The X-102 sensors are equipped with very strong magnets. Do not let
the sensors get close to each other because they will immediately
snap together and can only be separated using a great deal of force.
Mounting a single sensor.
The cable is secured to the T-piece. The
two inputs are internally wired in parallel.
Mounting two sensors and connect the
cables to the T-piece. In this arrangement
the dual-compensated output is the aver-
age of the two sensors.
Take care not to mount the sensor too close to the
clamp location. The clearance must be at least
twice the diameter of the tie bar.
Bad example
–
the sensor is too
close to the clamp.
min. 2 x Holm
X
