X Rocker X-Dream Rocker, Руководство пользователя

Страница: 8 / 9

Need Help? Email: info@boysstuff.co.uk Web: www.boysstuff.co.uk
Phone +44 (01676) 535557
TROUBLE SHOOTING
- Unable to connect to game console -
Most gaming consoles are shipped from the manufacturer with an Audio/ Video RCA cable. The A/V RCA cable
has three RCA plugs: a video plug (yellow) and two audio plugs (red and white). If your gaming console came
with an A/V RCA cable, please follow the instructions supplied by the game console manufacturer for setting
up your gaming console and connecting it to the television. Please note that you must leave the red and white
audio jacks on the A/V cable UNCONNECTED. Once the console is properly connected to your TV, please follow
the diagram in the illustrated X Rocker Set-up guide to connect the gaming
console to the X Rocker.
If your gaming console was shipped with a coaxial cable, instead of an A/V RCA cable, you must follow an
alternate set—up procedure (coaxial cable is the same type of cable that is used to connect a VCR to the T\/).
You will quickly recognize if your gaming console uses this type of cable. It connects the gaming console
directly to the television and carries both the audio and video signal over a single cable. If your gaming console
uses a coaxial cable, you CAN NOT connect it directly to the X Rocker. Instead, you must
Use an intermediary A/V device (such as aTV, VCR, DVD, TiVO, etc.) Please follow these steps:
a. Connect your gaming console to the intermediary A/V device via the coaxial cable.
b. Connect the X Rocker to the 'Audio Out jack on the intermediary A/V device.
c. Follow diagram 2 in the X Rocker Set—up guide to connect the X Rocker to the intermediary A/V
device and finalize the setup.
If your gaming console is attached to an HD TV with an HDMI cable. You will need to connect the chair using
either the audio out jacks on the back of the TV or by plugging into the headphone jack on the front of the TV.
- Unable to hear any sound from the X Rocker -
1. Check to ensure that the power adapter is properly connected to the power jack (A7). When properly
connected, the indicator light (A8) on the control panel should light up when the power switch (A6) is
turned on. If the indicator light (A8) does not light up, try to use another power outlet in your home.
When the TX box is switched on (Ai 3) for use in wireless mode, the power indicator light on its front
panel should also light up. If the light is not on, please try changing the batteries in the TX.
2. Make sure the power unit is turned on and indicator light on the control panel is lit. If it is not, please
press the power switch on the control panel. When you use wireless mode, the power indicator light on
the front panel of the TX box turns green. If the light is not on, please turn on the power switch (Ai 3) on
the side. Check the BAND selector (Ai 4) on the side of the TX box and make sure the number selected is
the same as the number selected on the BAND selector (A5) of the control panel on the chair. For
example, if the BAND selector on the TX box is on "l " make sure the BAND selector on the control panel
is also on "1”
3. Once you have successfully completed 1. and 2. Please review the X Rocker illustrated set-up guide.
Double check all audio connections. Finally, check that the volume on the hand remote is turned to an
audible level on both the W and the chair.
4. If you have completed l- 3 and still do not hear sound, try connecting another audio source (CD player,
television, VCR or game console) and go through the steps again. Still not working?
1. For technical problems please first contact support@x-rocker.co.uk
1. Please contact Boy’s Stuff Support on info@boystuff.co.uk
2. Please call Boys Stuff S44 (0) 1676 535557