X-Rite PANTONE Judge QC, Руководство по эксплуатации

Страница: 14 / 16

Judge QC
14
P/N JQCUSMA-ENG Rev. A
5. Verify that the lamps are replaced properly by illuminating each one separately to make certain that
the operating switch turns the desired lamp ON and OFF.
6. To reset the lamp status indicator:
a) Push and hold the three buttons circled below for 3 seconds. The blue LED’s above will all
illuminate when this has registered.
b) Then push and hold the second button from the left for 3 seconds.
c) Switch the power off unit. The lamp status indicator is reset and will only resume counting from
when the unit is next powered up.
Replacement Lamps
•
SERVICE PROPERLY: With the exception of lamp replacement, do not attempt to service this
product yourself. If you should attempt unauthorized repairs, you invalidate the warranty that is
active on your unit. For any other malfunctions in operation, contact X-Rite Technical Service.