X-Rite ATD, Инструкция по эксплуатации инструмента

Страница: 28 / 38

S E C T I O N T H R E E
3-4
CLEANING THE SCANNING CALIBRATION DISKS
On a daily basis you may need to clean the Calibration Disks located in the
Track. This is a relatively easy procedure requiring only a few minutes of
time.
1. Carefully slide the Scanning Head away from the Docking Station.
2. Pull Calibration Cover towards the Docking Station to expose the
Disks.
3. Clean Disks with a cotton swab or lint-free cloth.
4. Blow off Disks with compressed air.
5. Blow out under the Calibration Cover with compressed air.
4. Carefully release Calibration Cover and slide Scanning Head back
against Docking Station.
Calibration Cover
Docking Station
Scanning Head
Cotton Swab
Black Cal Disk
White Cal Disk