【P17】
XR8216
XR8216
XR8228
XR-A2026
【P15】
【P16】
Note : Do not over tighten to ensure free
提 示：安装转向推杆配件不能太紧，需自由活动。
Note : Apply silicone oil #500~#1000 on the shaft.
提 示：管身灌入#500~#1000号的避震油。
Note：Install the brake set , the brake cable should through the cable post first,then through brake cable arm.
提示：安装时需先把刹车线过穿过刹车定位再装刹车拉杆。
Note： There are 3 holes to adjust turn in the shock absorbed.the left side is fast turns ,the right side is for beginner and the middle is default setup.
提 示：减震器固定板有3个孔可调，左边为快速转弯；右边为初学者；中间为出厂默认设置。
Note : If the motorcycle does not run straight even after adjusting the steering trim or steering movement is not responding properly. It is possible the
steering arm is bent. In this case, please use the include tweezers to gradually, while not operating the steering.
提 示： 如果在调整转向微调后摩托车仍然不能直线行驶或者转向正确的方面，很有可能是因为转向螺纹杆弯曲了，这种情况，请在不操作转向的状态下，通过工具，将转向螺纹
杆向中心位置调整。
XR8198
XR8220
XR8222
XR8106
Φ2.5xΦ5x0.5(3PCS)
XR8222
XR8110
XR8105
14
