X-POWER 8885741, Руководство пользователя

Страница: 9 / 28

121
8
Step 4
Attach the hose connector to pressure washer. Before attaching the connector to the male
fitting, remove the plastic cap, which is inserted onto the male fitting on the pressure washer
before shipping. This plastic cap can be discarded once removed. After both components have
been installed, attach the garden hose with connector screw on the pressure washer. Connect
the garden hose to the waterspout.
2 00 PSI Pressure Washer
OPERATING INSTRUCTIONS
THIS UNIT IS INTENDED TO BE USED WITH COLD WATER ONLY!
DO NOT USE HOT WATER IN THIS PRESSURE WASHER!
Starting Up
After connecting the pressure washer to your cold
water supply, proceed as follows:
-
Make sure that the on/off switch is
in the off position.
-
Connect the garden hose with a quick
connect to the inlet fitting.
-
Attach the hose to the gun as per
assembly instruction step #1.
-
Insert the adjustable spray nozzle
into the gun as per assembly step
#2.