Impurities in the water can damage the pressure pump and the accessories.
Water supply from mains, or drawing in water from the open reservoirs
Insert the suction hose connection into the appliance in place of the fine filter.
Put the suction hose with the integrated filter into the water source.
This pressure cleaner is suited to work with the YILI suction hose to draw in surface water, e.g. from
water butts or ponds.
Operation
ATTENTION
Dry running of appliance leads to damage of the pump. If the appliance does not build up pressure
within 1 minutes, switch the appliance off and proceed in accordance with the instructions in Chapter
“Troubleshooting”
ATTENTION
Connect the product to battery pack and water supply as described.
• Hold the trigger gun with both hands.
• Direct the nozzle of the chosen accessory away from you towards the surface to be cleaned.
• First press the safety lock(1) and don't loosen it , then press the switch(2) of the trigger gun until a
constant amount of water flows through the nozzle, to allow air trapped in the hose to escape.
