Copyright © Vertical Leisure LTD 2014 | All rights reserved.
Version: 1.01
4
1.
After removing the X-Pole warmer from its packaging familiarize yourself with the Operation &
Controls instructions on page 3.
2.
Wrap the warmer pad tightly around the X-Pole starting with the bottom of the pad where the power
cord exits, approximately 750mm (30”) from the floor. Secure using the ‘Hook & Loop’ tape down the
edges of the warmer pad.
3.
Once securely attached, plug the pole warmer into the power supply. Use an extension lead if needed
to ensure that the main power core is not stretched. A stretched lead/cord will pull the warmer pad
down the pole.
4.
Making sure the warmer is attached securely press the ‘On/Off’ button and select the heat setting
required. Please see ‘Operation and Controls’ page. 3 section 2 for further details.
Important:
Regularly check the surface heat of your pole to ensure the surface does not get too hot.
Once satisfied the pole is at the correct temperature, turn ‘OFF’ the pole warmer, remove the warmer
from the pole and allow it to cool down (this can take around 5 minutes). Take care to fold it without
tight creases when it has fully cooled down (tight creases can damage the internal element) and place
it in the bag supplied.
QUICK START GUIDE
ON/
OFF
Hea
t Setting
ON/OFF
Heat Setting
750mm (30”)
