10
3. Configuration
3.1 Link Information
The default page is as below after you launch the Utility program.
Status:
Shows the SSID associated, which can be used to identify the wireless
network.
SSID:
Shows current SSID, which must be the same for the wireless client and
AP in order for communication to be established.
Frequency:
Shows the current frequency used for wireless network.
Wireless Mode:
Shows the current wireless mode used for wireless
communication.
Encryption:
Shows the current encryption mode used for wireless network.
Tx Rate:
Shows the current data rate used for transmitting.
Channel:
Shows the current channel for communication.
Link Quality
: Shows the link quality of the 108Mbps Wireless Network USB
Dongle with the Access Point when operating under Infrastructure mode.
Signal Strength
: Shows the wireless signal strength of the connection between
the 108Mbps Wireless Network USB Dongle with the Access Point.
Data Rate:
Shows the statistics of data transfer, and the calculation is based on
the number of packets transmitted and received.
