44
Enable:
Click to enable or disable the firewall rule profile.
Name:
Type a descriptive name for the firewall rule profile.
Action:
Select whether to allow or deny packets that conform to the rule.
Source:
Defines the source of the incoming packet that the rule is applied to.
●
Interface:
Select which interface (WAN or LAN) the rule is applied to.
●
IP
Range
Start:
Type the start IP address that the rule is applied to.
●
IP
Range
End:
Type the end IP address that the rule is applied to.
Destination:
Defines the destination of the incoming packet that the rule is applied to.
●
Interface:
Select which interface (WAN or LAN) the rule is applied to.
●
IP
Range
Start:
Type the start IP address that the rule is applied to.
●
IP
Range
End:
Type the end IP address that the rule is applied to.
●
Protocol:
Select the protocol (TCP, UDP, or ICMP) of the destination.
●
Port
Range:
Select the port range.
Add:
Click to add the rule profile to the table at the bottom of the screen.
Update:
Click to update information for the rule if user have selected a list item and have made
changes.
Delete:
Select a list item and click
“Delete”
to remove the item from the list.
New:
Click
“New”
to erase all fields and enter new information.
Priority Up:
Select a rule from the list and click
“Priority Up”
to increase the priority of the rule.
Priority Down:
Select a rule from the list and click
“Priority Down”
to decrease the priority of the
rule.
Update Priority:
After increasing or decreasing the priority of a rule, click
“Update Priority”
to save
the changes.
Management
Management enables user to set up SNMP and Remote Management feature.
Содержание XWL-11GRAR
