NetStatus Tab
The current status of the X-Micro WLAN 11b mini USB Adapter can be
found here. The NetStatus Tab contains several fields where operating
parameters of the driver can be viewed or changed. Changes to any of
the parameters in this panel can be applied to the driver without a need
to restart the computer.
Site Scan Tab
Please wait system to scan or click Re-fresh, all Access Point and
Ad-hoc devices within detectable range will be found and their related
information will be displayed in the list. You can assign Access Point or
Ad-hoc devices which you want connect to. We also can change
presently connection just double click SSID from the list.
Statistics Tab
If you have a link with a wireless LAN device, then you can see the real
time Link Status, Signal strength, and transmit / receive statistics in this
tab. If check the
Turn Radio OFF
, the radio interface will be turn off.
Encryption Tab
You may want an additional measure of security on your wireless
network, which can be achieved by using WEP (Wired Equivalent
Privacy) encryption. WEP encrypts each frame transmitted from the
radio using one of the Keys entered in this panel.
When an encrypted frame is received it will only be accepted if it
decrypts correctly. This will only happen if the receiver has the same
WEP Key used by the transmitter.
To be written to the driver and registry, each key must consist of hex
digits, which means that only digit 0-9 and letter A-F are valid entries.
You can set this to disable, 64 bits or 128 bits.
Info Tab
Info tab shows the Driver version including the detail of Configuration
Utility, and NIC firmware version. Users must use this version number
when reporting their problems for technical support.
Profile tab
Profile tab allows you to save the information associated with a specific,
so you can quickly and easily connect to your network when you are in
that location. This page allows you to new, delete and edit your profiles.
