¾
Some of computers may have power leaky or other
problems, to avoid any direct damage caused to APEX
Flash Stick USB 2.0, we suggest you use extension cable,
USB hub or docking station to connect APEX Flash Stick
USB 2.0 to your computer. Do not straightly plug APEX
Flash Stick USB 2.0 to computer.
How to set up driver in Windows 98
1.
Power on your computer and boot to Windows and run the
SETUP.EXE program. Follow the instructions shown on the
screen until driver is completed.
2.
Locate the USB port and plug in APEX Flash Stick USB 2.0.
Windows will detect the USB Mass Storage Device.
How to set up driver in Windows XP/2000/ME
It doesn’t need installation driver for Windows XP/2000/ME.
However, when you first time plug Storage to USB port, it will be
recognized as USB2.0 device and the system will automatically
install necessary program. You just click
【
next
】
and complete set
up program.
Using the APEX Flash Stick USB 2.0
Once you have done the Setup installation, you are now ready to
use the APEX Flash Stick USB 2.0. You work with it just like another
disk drive. You can even unplug it when the computer is turned on.