4-Port USB 3.0 SuperSpeed PCIe Adapter
Page | 4
Chapter 2 Installation Guide
2.1
Hardware Installation
To Install the Adapter, please follow these steps listed below:
1.
Turn off your computer and unplug the power cord and all cables
2.
Remove your computer’s case cover
3.
Locate an available PCI Express slot
4.
Remove the screw that secures the slot bracket (the small piece of metal that covers the
opening for PCI Express Adapter on the back panel of your computer), then remove the slot
bracket
5.
Carefully insert the Adapter into the PCI Express slot. Please avoid touching the gold
connector of the Adapter
6.
Secure the Adapter to the case by using the screw you removed from the slot bracket
7.
Reinstall your computer’s case cover
8.
Plug in the power cord and all other cables, and then turn on your computer
2.2
Software Installation
This section will guide you through the installation procedures for Windows 7. Please follow
the steps.
2.2.1
For Windows 7 Installation
1.
Insert the CD driver disk into CD-ROM drive and click the InstallShield Wizard for
driver installation.
