X-Loupe G-series, Руководство пользователя

Страница: 9 / 18

page 14 page 15
Shooting Strategy Shooting Strategy
Taking pictures for a flat subject Taking pictures for a flat subject (2)
Taking pictures for a non-flat subject (1)
Put the contact ring on the objective lens before shooting. The barrel part of the objective lens can be removed by
rotating it counterclockwise and vice versa for the assembling.
To keep a stable pose without the assistance of the contact
ring and barrel, please use two fingers to uphold the objective
lens with another finger touching the subject surface gently.
Move the camera up and down slightly to reach the best
working distance. Press the camera shutter halfway to focus.
When the AF (autofocus) green frame(s) is shown on the
camera, fully press the camera shutter to shoot. Any shaking
or vibration should be carefully revented during shooting.
Keep rotating the barrel until it is removable from the objective
lens.
Have the contact ring closely touched the surface of the
subject. Slightly press X-Loupe® on the subject to reach the
best working distance, and press the camera shutter halfway
to focus. The AF (autofocus) green frame(s) should show up
when the camera focuses. Fully press the camera shutter to
shoot. Any shaking or vibration should be carefully prevented
during shooting.
The contact ring is not essential in this scenario unless the
surface of the subject is vulnerable and easy to be scratched.
Aim the camera at the subject. Hold the objective lens by two
fingers. Slightly move around the camera up and down to
reach the best working distance, while pressing the camera
shutter halfway to focus. When the AF (autofocus) green
frame(s) is shown on the camera, fully press the camera
shutter to shoot. Any shaking or vibra tion should be carefully
prevented during shooting.