- 30 -
air intakes will open wider (Fig. 21); when the central button is
released, it will remain down, opening the JSW system main venti-
lation channel. At the same time, the rear vent port will open auto-
matically.
3.2.4 - To close the top ventilation system, press the top front Reset
button (Fig. 22).
3.3 - Top ventilation system disassembly
3.3.1 - While holding down the upper reset button, insert a small
screwdriver in the front part between
the button and the cover (see Fig.
23). Apply a light pressure until the
system clicks open. Remove the
screwdriver and simultaneously take
the system out by pulling it towards
the helmet front. Remove the front
port by applying a light pressure
towards the helmet outside.
WARNING!
Clean the system with water and mild soap only. Dry
it with compressed air.
22
23
