2
Support
Should you encounter difficulty with the installation or programming, please
check the MW3.1 Help File or check the troubleshooting guide on our web
site. You may also contact our technical support department.
E-mail: [email protected]
Phone: 1-517-655-5523
Compatibility
X-keys USB devices are compatible with any computer or host system which
supports USB HID Keyboard input. For more information contact our
Technical Support Department ([email protected]).
Identifying the Keys
Select appropriate icons or use the blank side of the legend sheet to create
your own key legends. The keycaps snap off with a fingernail or small
screwdriver. Apply the label under the keycap, and replace it. The key caps
hold a legend 0.575" wide and 0.5" high (14.6mm x 12.7mm). Other options
are available for printing legends for multiple units. Contact our Sales
Department ([email protected]) for more information.
Horizontal and Vertical Double-keys
The included double-keys replace two single keys on the X-keys. To install a
double key cap, remove two adjacent keys with the provided key-puller.
Pressing the key puller over an adjacent key and working it under the cap to
be removed is the recommended method. Press the double-key in place over
the two exposed switch stems.
Key Blockers
Unused keys may be replaced with optional key blockers and identified as
blocked keys in MW3.1.
Feet
The included angled feet may be snapped in to the bottom of the XK-24 to
give it a slight tilt in either portrait or landscape orientation.
