X-IO Hyper ISE, Руководство пользователя

Страница: 88 / 178

Page 80 160337-000 Rev D, 30 September, 2013 Xiotech—Proprietary
ISE User Guide ISE Management
CLI, View–Modify Volume Configuration
View existing volumes from the CLI using the
show volume
command.
Note.
The Local ID (LDID) number provides the means to map the relevant events in the Event Log to the
name given the volume during volume creation. The LDID number for each volume is displayed below the
volume status as shown in the following example.
Figure 54. Show Volume Example
Change the volume name, cache policy, and optional comment through the CLI using the
modify
command
with the options shown in Table 20 below.
Table 20: Modify Volumes
Command Options Comment
modify --volume= <name>
--name=<new name>
Change the volume name
--write-back or --wb
Change cache policy to write-back
--write-through or --wt
Change cache policy to write-through
--comment= <comment text>
Change the optional comment
Example:
modify --volume=Payroll --name=Transaction --wt --comment=”transaction volume”
Volume7: (Pool 1, 20 GB, Raid 1, Write-Back cache)
-----------------------------------------------------------------------
Status : Operational (None)
LDID : 20
GUID : 6000CA08806310002787000200000000
Comment : Transaction Volume
Hosts : GEN01(LUN:7)
-----------------------------------------------------------------------