Solar Powered Wi-Fi Camera WWC500 User Manual V1.00
2
1. Solar panel: Charge the lithium batteries in the unit; Please try best to install it in places under direct
sunlight, or use attached extender cable to install solar panel separately.
2. WIFI antenna: connect to WIFI router in WIFI mode, or Connect the mobile phone directly in AP hotspot
mode.
3. White-light source: two white lights at front . Automatically switch on at night when detect moving object in
covered area.
4. Infrared light: two infrared lights under lens at front. Automatically switch on during night time.
5. Light sensor: Sense the illumination, and judge as night time when less than 2Lus;
6. Lens: capture image video;
7. Microwave Motion sensor: When a person or a moving object is moving in front of the device, a trigger
signal will be generated and sent to the main unit;
8. Indicator Light:
White Light On: solar panel is charging the battery.
Green Light On: Sensed moving object
Red light flashes slowly: AP hot spot working and the system is waiting for configuration, or work as AP
mode.
Blue light flashes slowly: Working normally
Alternate flashing of red and blue: unconnected WIFI
9. Card slot waterproof cover: Please be sure to cover it properly.
10 Waterproof microphone
11. Power Switch: Power on camera at white light mode or infrared light mode;
12. Reset: Pressing and holding this button for 5 seconds, set camera to the factory setting (red light flashes);
13. TF card slot: 8G/16G/32G/64G are supported (Please format at FAT32 first before inserting);
14. USB port: For device updating.
1.3 . Specifications
Model/Name :
Solar Powered Wi-Fi Camera
Model : WWC500-D2A-WD
Effective pixels : 2.0 megapixel
