Wyrestorm TX-35-IW, Быстрый старт

Страница: 4 / 4

Copyright © 2020 WyreStorm Technologies | wyrestorm.com
TX-35-IW Quickstart Guide | 201112
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
support@wyrestorm.com
4 of 4
Specifications
Transmission
Transmission Encoding
HDBaseT Class B
End to End Latency 10μs (micro seconds)
Maximum Transmission Bit Rate 10.2Gbps
Audio & Video
Inputs
1x HDMI In: 19-pin type A
Outputs 1x HDBT Out: 8-pin RJ45
Maximum Pixel Clock 297MHz
Video Resolutions (Max)
Video Resolution HDMI Cat6 Cat6a/7
1920x1080p @60Hz 15m/49ft 70m/230ft 70m/230ft
3840x2160p @60Hz 8bit 4:2:0 5m/16ft 35m/115ft 35m/115ft
3840x2160p @24Hz 10bit 4:2:0 HDR 5m/16ft 35m/115ft 35m/115ft
4096x2160p @60Hz 8bit 4:2:0 5m/16ft 35m/115ft 35m/115ft
Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference.
Supported Standards DCI | RGB | HDR10 | BT.2020
Audio Formats 2ch PCM | Multichannel LPCM | DTS-X and Dolby Atmos
Maximum Sampling Rate 192KHz
Communication and Control
HDMI
v2.0 TMDS | HDCP 2.2 | EDID | DVI/D Supported with adapter
IR Passthrough; Front panel window, Rear 3-pin phoenix
RS-232 1x 3-pin Phoenix, Bidirectional passthrough
EDID Pass-through, from RX
Power
Power Supply
PoH from RX; 12V DC 2A 2-pin phoenix (Optional)
Max Power Consumption 9.3W
Power-over-HDBaseT (PoH) Supported, 1-way from RX
Environmental
Operating Temperature
0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing
Storage Temperature -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing
Maximum BTU 31.7 BTU/hr
Dimensions and Weight
Installation
In-wall, 1-gang
Height 105mm/4.13in
Width 45mm/1.77in
Depth 38mm/1.55in
Weight 0.16kg/0.35lbs
Regulatory
Safety and Emission
CE | FCC | RoHS | RCM | EAC