Wyrestorm SW-0402-MV-HDMI, Быстрый старт, Страница: 4 / 4

Copyright © 2015 WyreStorm Technologies | wyrestorm.com
SW-0402-MV-HDMI Quickstart Guide | 151014
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
support@wyrestorm.com
Warranty Information
This product is covered by a 2 year limited parts and labor warranty. During this period there will be no charge for unit
repair, component replacement or complete product replacement in the event of malfunction. The decision to repair
or replace will be made by the manufacturer. This limited warranty only covers defects in materials or workmanship
and excludes normal wear and tear or cosmetic damage.
Visit the product page located at wyrestorm.com for additional information on this product including important
technical information not provided in this document and warranty terms & conditions.
4 of 4
Audio and Video
Audio Formats 2ch analog | 2ch LPCM
Video Resolution 3840x2160p@30Hz
Color Depth 36bit
Maximum Pixel Clock 297 MHz
Communication and Control
HDMI HDCP | EDID
DVI/D supported with adapter (not
included)
Ethernet 10/100 Mbps auto-negotiating
IR Switcher control with IR Ext for
connection to an IR Receiver.
RS-232 Switcher control with loop for additional
switchers.
Power
Power Supply Input: 100~240V AC 50/50Hz
Output: 12V DC 3A
Environmental
Operating Temperature 32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature -4°F ~ 140°F (-20°C ~ 70°C)
10% ~ 90%, non-condensing
Dimensions and Weight
Height 42mm / 1.65in
Width 439mm / 17.3in
Depth 254mm / 10in
Weight 2.85 kg / 6.27 kg
Regulatory
Safety and Emission CE | FCC
RoHS Compliant
Specifications Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to the switcher and that it is
powered On.
• Verify that the display supports the output resolution of the source.
• Verify that all source and display connections are not loose and are
functioning properly.
No or Intermittent Device Control
• Verify that the handheld remote has a clear line of sight to the IR
Sensor on the front panel or the IR Receiver if being used.
• Verify that the IR cable(s) is properly terminated if using an external IR
Receiver. See IR Wiring.
• Verify that the IR emitter is located near the IR Sensor on the front
panel if using an external IR Control System.
• Verify that the RS-232 cable is properly terminated. See RS-232
Wiring.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable
to other devices to verify functionality.
• Use a flashlight to locate the IR receiver behind any tinted panels on
the device being control.