4
4. Package Contents
6. Specifications
• 1 x Main unit: SW0201-POH Transmitter
• 1 x Main unit: SW0201-POH Receiver
• 1 x 19vDC power supply
• Printed instruction manual (digital copy available at
www.wyrestorm.com)
• USB Flash drive
Technical Support: [email protected] US: +866 677 0053 EU: +44 (0) 1793 230 343
PACkAGE CONTENTS, CONNECTION & OPERA
TION AND SPECIFICA
TIONS
Connect HDMI or VGA input sources (such as Blu-
Ray, DVD, HDD, Satellite/cable, computer, CCTV, media
server etc. etc.) to the SW0201-POH Transmitter.
Note
: Take care when connecting cables and do not
force insertion if resistance is felt.
Attach a good quality and well-terminated Cat5e/6/7
cable from the UTP OUT port of the Transmitter to the
UTP IN port of the SW0201-POH Receiver.
Note
: Although fully operable with Cat5e cable, we
recommend Cat6 as the preferred category cable for the
added bandwidth capacity.
Attention
The transmission distance of the
SW0201-POH is 100m/328ft under perfect
transmission conditions. Please be aware that
transmission can be adversely effected by kinks,
strains or bends in the cable, the use of patch
panels or wall outlets or electrical or environmental
interference. Steps should be taken to minimize
these factors (or remove completely) during
installation for best results.
Connect an HDMI sink device (such as: LED/LCD
TV or digital projector) to the HDMI OUT port of the
SW0201-POH Receiver using a good quality HDMI cable,
ensuring firm connection in both ports.
Connect the 19v DC power supply provided to
the SW0201-POH Transmitter and power on the unit,
ensuring Power status LED is lit to indicate the unit is
powered.
Power on the HDMI or VGA Input source to be
used. Check the STATUS LED on the Transmitter to
confirm a signal is being received by the unit.
Note
: If both inputs are powered and sending a signal,
VGA will be preferred.
If using the SW0201-POH as an extender set, the
SW0201-POH Receiver draws power directly from the
Transmitter HDBaseT so no mains power is required at
the display zone.
Note
: The SW0201-POH Receiver also includes a 19v
DC power input for optional use or when using the unit as
a standalone display receiver.
Power on the HDMI display device.
Operation: the SW0201-POH features input auto-
detection, with VGA taking priority when both HDMI and
VGA sources are connected. To select the HDMI input,
simply power on the HDMI input device and power off the
VGA device.
Attention
Insert/Extract cables gently.
Note
: Specifications are subject to change without
notice. Mass and dimensions are approximate.
5. Connection & Operation
1
6
7
8
2
3
4
5
24mm/0.94”
640x480/800x600/1204x768/1280x1024
1600x1200/1920x1200
640x480/800x600/1204x768/1280x1024
1600x1200/1920x1200
DTV/HDTV: 1080p/1080i/720p/576p
480p/576i/480i
HDMI 1.3
5 volts p-p (TTL)
0.5-1.0 volts p-p
2.25 Gbits x 3
5 to 90% RH (no condensation)
-5 to +35�C (-41 to +95�F)
PCM 2.0
100m / 328ft
15 Watts (Max.)
0.3kg/0.66lb
117mm/4.06” x 107/4.2”
x 24mm/0.94”
