Wyrestorm SP-618, Быстрый старт

Страница: 3 / 4

Copyright © 2021 WyreStorm Technologies | wyrestorm.com
SP-618 Quickstart Guide | 201103
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
support@wyrestorm.com
3 of 4
Troubleshooting
No or Poor-Quality Audio or Video (snow or noisy image)
• Verify that power is being supplied to the source and receiving device and
they are not in standby mode
• Verify that all HDMI connections are not loose and are functioning properly.
• Verify that the output resolution of the source and display is supported by
this splitter.
• If transmitting 3D or 4K, verify that suitable HDMI cables are being used.
No or Intermittent 3rd party Device Control
• Verify that the RS-232 cables are properly terminated following the Wiring
and Connections section.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable to
other devices to verify functionality.
Audio and Video
Inputs
1x HDMI In: 19-pin type A
Outputs 8x HDMI Out: 19-pin type A
Video Encoding Uncompressed 18Gbps
End to End Latency None
Audio Formats 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos
Video Resolutions (Max)
Video Resolution HDMI
1920x1080p @60Hz 16bit 7m/23ft
3840x2160p @60Hz 10bit 4:2:2 HDR10/10+ 5m/16ft
3840x2160p @60Hz 12bit 4:2:0 Dolby Vision 5m/16ft
3840x2160p @50Hz 10bit 4:2:0 HLG 5m/16ft
4096x2160p @60Hz 8bit 4:4:4 5m/16ft
Supported Standards DCI | RGB | HDR10 | HDR 10+ | Dolby Vision | HLG | BT.2020
Maximum Pixel Clock 600MHz
Communication and Control
HDMI
HDCP 2.2 | EDID | DVI-D supported with adapter (not included)
RS-232 1x 3-pin Phoenix connection
Power
Power Supply
100~240V AC 50/60Hz
Max Power Consumption 60W
Environmental
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing
Storage Temperature -4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing
Maximum BTU 205 BTU/hr
Dimensions and Weight
Rack Units/Wall Box
1U
Height 44.4mm/1.7in
Width 438mm/17.25in
Depth 184mm/7.25in
Weight 2.17kg/4.80lbs
Regulatory
Safety and Emission
CE | FCC | RoHS | RCM | EAC
Specifications
Each HDMI output has its own corresponding scaling switch: HDMI output 1 is connected to switch
1, etc. The scaling function can be independently turned on or off for each output. Turn scaling on by
placing the switch in the down (1) position. To turn scaling off, place the switch in the up (0) position.
8 7 6 5 4 3 2 1
ON
8 7 6 5 4 3 2 1
ON