Copyright © 2020 WyreStorm Technologies |
RXV-70-G2-SCL Quickstart Guide | 200602
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
2 of 4
Front Panel
Rear Panel
Power LED
Solid:
The receiver is powered On
Off:
The receiver is powered Off
Status LED
Flashing:
The receiver is operating normally.
Off:
The receiver is Not operating normally.
HDCP LED
Solid:
HDCP content is present.
Flashing:
HDCP content is not present.
Off:
No signal.
LINK LED
Solid:
Link to receiver has been established.
Flashing:
Link to receiver has not been
established.
Power Input
5.5mm Screw Down Barrel Jack
Connect to the included 12V DC 1A power
supply to the transmitter or receiver. A power
supply is not required on the other end as it
will be powered using PoH.
HDBT In
8-pin RJ-45 female
Connect the matrix
HDBT Out
to
receivers
HDBT In.
IR TX
IR RX
IR TX
- 3.5mm (1/8in) Mono Jack: Connect
to the supplied IR emitter to control a local
device from the remote display location via
HDBaseT
IR RX
- 3.5mm (1/8in) Stereo Jack: Connect
to the supplied IR receiver to send IR to the
remote display location via HDBaseT.
for more
information.
RS-232
1x RS-232: 3-pin Phoenix
2ch Audio Output
3.5mm (1/8in) Stereo Jack:
Outputs audio signal from source device
F
S/PDIF Audio
Output
TOSLink Digital Optical
Outputs audio signal from source device
G
HDMI Out
19-pin type A HDMI female
Supports HDMI and DVI/D with adapter
A
C
B
D
A
C
B
D
E
F
G
