background image

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973) 

[email protected]

4 of 4

Note: 

WyreStorm reserves the right to change product specification, appearance or dimensions of this product at any time without prior notice. 

For full specifications for individual NetworkHD products, visit 

wyrestorm.com.

Audio and Video

110 Series

NHD-250-RX

400 Series

600 Series

Inputs

TX

1x 8-pin RJ-45 

(Transmission from TX)

TX

TX

1x 19-pin HDMI type A female

1x 19-pin HDMI Type A

1x DisplayPort 20-pin 

1x HDMI 19-pin type A

1x 3.5mm (1/8in) TRS Stereo

RX

RX

RX

1x 8-pin RJ-45

1x 8-pin RJ-45

1x 8-pin RJ-45

Outputs

TX

1x 19-pin HDMI Type A

1x Audio Out: 3-pin Phoenix

TX

TX

1x 8-pin RJ-45 female 

1x Audio Out: 3-pin Phoenix

1x 19-pin HDMI Type A

1x 3.5mm (1/8in) TRS Stereo

1x 8-pin RJ-45

1x 8-pin RJ-45

1x 3.5mm (1/8in) TRS Stereo

RX

RX

RX

1x 19-pin HDMI Type A 

1x Audio Out: 3-pin Phoenix

1x HDMI Out 19-pin type A 

1x Audio Out: 5-Pin Phoenix

1x 3.5mm (1/8in) TRS Stereo 

(v2)

1x HDMI 19-pin type A

1x 3.5mm (1/8in) TRS Stereo

Output Video Encoding

H.264/H.265 (H.265 only 

on 110s)

H.264

JPEG 2000

SDVoE

Encode/Decode Data Rate

2~30Mb/s

Max: 30Mb/s per stream

850Mbps

10Gbps

Max End to End Latency

60~90 ms (Low latency mode) 

| 250~300 ms (High quality 

mode)

~80ms (low latency mode) | 

~300ms (high quality mode)

1 video frame latency (pass-

through mode) 16ms @60fps | 2 

video frames latency (scaler/VW 

mode) 33ms @60fps

Genlock Mode: Uncompressed = 

30us, Compressed <120us

Fast Switch Mode: 1~2 video 

frames = min. between 16.7 – 

33.4ms @ 60fps

Audio Formats

2ch PCM

2ch LPCM 48KHz

2ch LPCM | Multichannel: LPCM 

up to 7.1 and up to DTS:X and 

Dolby Atmos

2ch PCM | Multichannel: LPCM 

and Up to Dolby Atmos and 

DTS-X

Max Video Resolutions

1920x1200p @60Hz 8bit

1920x1200p @60Hz 8bit

3840x2160p @60Hz 8bit 4:2:0

2160p @60Hz 12bit 4:2:2

Max Pixel Clock

165MHz

594MHz

300 MHz

595 MHz

Supported Standards

HDR10, HLG, BT.2020

HDR10 | HLG | BT.2020 | 3D 

Video | Dolby Vision

Communication and Control
HDMI

HDCP 1.4 | CEC

HDCP 1.4 | CEC

HDCP 2.2 | CEC

HDCP 2.2 | CEC

Ethernet

1x 8-pin RJ-45 female | 

10/100Base-T | PoE

1x LAN (PoE): 8-pin RJ-45 ANSI/

TIA-568 8P8C, 1000Base-T, PoE 

PD (IEEE 802.3af)

1x LAN (PoE): 8-pin RJ-45 ANSI/

TIA-568 8P8C, 1000Base-T, PoE 

PD (IEEE 802.3af)

1x 10GbE SDVoE: 8-pin 

RJ-45 Female 10GBASE-T | 

1x LAN: 8-pin RJ-45 Female 

1000BASE-T

USB

RX: 2x USB 1.1 Device: Type A

TX: 1x USB 1.1 Host: Type B

Power: 5v 500ma per port

Data Rate: Max 115200bps

NA

RX: 2x USB 2.0 Device: Type 

A TX: 1x USB 2.0 Host: Type B 

Power: 5v 500ma per port Data 

Rate: Max 9MB/s

NA

IR

1x IR TX: 3.5mm (1/8in) TS

Mono | 1x IR RX: 3.5mm (1/8in)

TRS Stereo | Bidirectional Over

Ethernet | 2 Way | Broadcast |

Routed | API Programmable

NA

1x IR TX: 3.5mm (1/8in) TS 

Mono | 1x IR RX: 3.5mm (1/8in) 

TRS Stereo | Bidirectional Over 

Ethernet | 2 Way | Broadcast | 

Routed | API Programmable*

1x IR TX: 3.5mm (1/8in) TS 

Mono Jack | 1x IR RX: 3.5mm 

(1/8in) TRS Stereo Jack 

2 Way | Broadcast | Routed | API 

Programmable

RS-232

1x RS-232: 4-pin Phoenix | 2 

Way (RX only) | Routed | API 

Programmable

1x RS-232: 4-pin Phoenix | 2 

Way (RX only) | Routed | API 

Programmable

1x RS-232: 4-pin Phoenix | 2 

Way (RX only) | Routed | API 

Programmable

1x RS-232: 4-pin Phoenix 

Connector | 2 Way | Broadcast | 

Routed | API Programmable

Power
Power Supply

12V DC 1A

12V DC 1A

12V DC 1A

12V DC 3A

PoE

IEEE 802.3af | 12V 1A 12.95W

IEEE 802.3af (15.4W at PSE)

IEEE 802.3af (15.4W at PSE)

NA

Power Consumption

6W (DC adapter)

8.3W (with PSU)

8W (with PSU)

TX: 15.24W | RX: 18.64W

Environmental
Operating Temperature

0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing

Storage Temperature

-20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing

Maximum BTU

20.47 BTU/hr

31 BTU/hr

51.18 BTU/hr

63.6 BTU/hr

Regulatory
Safety and Emission

CE | FCC | RoHS | EAC | RCM

Copyright © 2021 WyreStorm Technologies | 

wyrestorm.com

NetworkHD Quickstart Guide | 210215

Specifications - NetworkHD 100/200/400/600 Series

*IR not available on 400-E models

Содержание NHD-400-RX

Страница 1: ...llation is run and terminated prior to making connections to the switcher Read through this section in this entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment IMPORTANT Wiring Guidelines The use of patch panels wall plates cable extenders kinks in cables and electrical or environmental interference will have an adverse effect on signal trans...

Страница 2: ... NHD 600 TX NHD 600 RX Audio Wiring NetworkHD uses three different audio outputs A 3 5mm 1 8in TRS Stereo Jack audio connection a 3 pin phoenix unbalanced audio connection and a 5 pin phoenix balanced audio connection Tip Ring Left Channel Right Channel Sleeve Ground GND 3rd Party Device Pin 1 L Left Signal To Left Signal L Pin 2 R Right Signal To Right Signal R Pin 3 GND Ground To Left Ground L R...

Страница 3: ...onnections 1 Install NetworkHD devices to allow airflow through the product WyreStorm recommends using the NetworkHD rack mounts The install location should be dry well ventilated and guaranteed to maintain the mandatory operating temperature range of the product 2 Connect sources to the NetworkHD encoders using a DisplayPort or HDMI cable from a quality brand such as WyreStorm Essentials ensuring...

Страница 4: ...5MHz 594MHz 300 MHz 595 MHz Supported Standards HDR10 HLG BT 2020 HDR10 HLG BT 2020 3D Video Dolby Vision Communication and Control HDMI HDCP 1 4 CEC HDCP 1 4 CEC HDCP 2 2 CEC HDCP 2 2 CEC Ethernet 1x 8 pin RJ 45 female 10 100Base T PoE 1x LAN PoE 8 pin RJ 45 ANSI TIA 568 8P8C 1000Base T PoE PD IEEE 802 3af 1x LAN PoE 8 pin RJ 45 ANSI TIA 568 8P8C 1000Base T PoE PD IEEE 802 3af 1x 10GbE SDVoE 8 pi...

Отзывы: