Page 6
2. Local IR remote control.
3. IR extender control
User can use the IR receiver cable to change the IR receiver position.
If controlling the MX0404-HDC through the 1/8” (3.5 mm) input jack on the rear
panel, connect the IR cable directly to the matrix rear IR Ext socket.
User can control the HDMI
route of the matrix by using
the IR remote.
There are four group key pads
for four output port. For each
output port source selection,
there are 4 number key and
two arrow key. Press number
key to select specific input
port. Left arrow is to backward
the input port, and right arrow
to forward input port.
