Warranty Information
This product is covered by a 3 year limited parts and labor warranty. During this period there will be no charge for unit repair,
component replacement or complete product replacement in the event of malfunction. The decision to repair or replace will
be made by the manufacturer. This limited warranty only covers defects in materials or workmanship and excludes normal
wear and tear or cosmetic damage. Visit the product page located at
for additional information on this
product including important technical information not provided in this document and warranty terms & conditions.
Specifications
Copyright © 2015 WyreStorm Technologies |
MX-0606-HDBT-H2L/MX-0808-HDBT-H2L Quickstart Guide | 170516
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
4 of 4
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to devices in the system and that they
are powered on.
• Verify that all source and HDBaseT connections are not loose and are
functioning properly.
• Verify that the HDBaseT cable is properly terminated per the
• Verify that the matrix, receiving device, and display supports the output
resolution of the source. Refer to
Video Resolutions
table for the max distance based on resolution.
• If transmitting 3D or 4K, verify that the HDMI cables used are 3D and/or 4K
rated.
No or Intermittent Matrix or 3
rd
party Device Control
• Verify that IR cable(s) are properly terminated. See
• Verify that the IR emitter is located near the IR receiver on the device.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable to
other devices to verify functionality.
• Use a flashlight to locate the IR receiver behind any tinted panels on the
device being controlled.
Power
Power Supply
Input: 100~240V AC 50/60Hz
PoH
48V 15.4W (each HDBT output)
Max Power Consumption
120W
Environmental
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%,
non-condensing
Storage Temperature
-4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%,
non-condensing
Maximum BTU
409.4 BTU/hr
Dimensions and Weight
Rack Units/Wall Box
2U
Height With | Without Feet
95.7mm/3.7in | 87.7mm/3.4in
Width With | Without Rack Ears
487.2mm/19in | 438mm/17.1in
Depth With | Without Handles
423.7mm/16.5in | 397.5mm/15.5in
Weight
8.2kg/18.04lbs
Regulatory
Safety and Emission
CE | FCC | RoHS
Audio and Video
Inputs
6/8x HDMI 19-pin type A
Outputs
6/8x HDBaseT 8-pin RJ-45 female
Audio Formats
2ch PCM | Up to DTS-X and Dolby Atmos
Output Video Encoding
HDBaseT Class B
Encoding Data Rate
10.2Gbps
End to End Latency
10μs (micro seconds)
Video Resolutions (Max)
HDMI
1920x1080p @60Hz 12bit (15m/50ft) | @60Hz 16bit (7m/23ft)
3840x2160p @30Hz 4:4:4 8bit (7m/23ft) | @24Hz 4:2:0 HDR 10bit per channel (3m/9.8ft)
4096x2160p @60Hz 8bit 4:2:0 (7m/23ft) | @60Hz 8bit 4:4:4 (3m/9.8ft)
Using
Cat6
1920x1080p @60Hz 12bit (70m/230ft) | 16bit (35m/114ft)
3840x2160p @30Hz 4:4:4 8bit (35m/114ft) | @24Hz 4:2:0 HDR 10bit (35m/114ft)
4096x2160p @60Hz 4:2:0 8bit (35m/114ft)
Using Cat6a/7
1920x1080p @60Hz 12bit (70m/230ft) | @60Hz 16bit (40m/131ft)
3840x2160p @30Hz 4:4:4 8bit (40m/131ft) | @24Hz 4:2:0 HDR 10bit (40m/131ft)
4096x2160p @60Hz 4:2:0 8bit (40m/131ft)
Color Depth
1080p: 16bit | 4K UHD: 8bit | HDR @24p: 10bit BT.2020
Maximum Pixel Clock
HDMI: 600mHz | HDBaseT: 297MHz
Communication and Control
HDMI
HDMI 2.0 | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDBaseT
HDCP 2.2 | EDID | 1-way PoH | Bidirectional IR
IR
1x IR Ext - 3.5mm (1/8in) Stereo | Matrix Control
6/8x IR TX - 3.5mm (1/8in) Mono | 6/8x IR RX - 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT
RS-232
Matrix Control | Firmware Updates
