Front Panel
Rear Panel
Source/Output
Selection
Displays the source input number currently selected for the corresponding output number.
MX-0404-H2: 1-4
MX-0606-H2: 1-6
IR Sensor
Receives IR signals from included handheld IR remote or attached emitter from IR control system for matrix control.
Source/Output
Navigation
Left/Right:
Output Selection
Up/Down:
Input Selection
Enter:
Confirm Selection
Power Switch
Up:
Power On matrix
Down:
Power Off matrix
Power In
IEC 3-prong
Connect to 100~240V AC 50/60Hz using the included IEC power cord.
HDMI In
19-pin type A HDMI female:
MX-0404-H2: 1-4
MX-0606-H2: 1-6
Supports HDMI and DVI/D (requires adapter-not included). Limited to 600MHz pixel clock.
LAN
8-pin RJ-45 female | 10/100 Mbps auto-negotiating
Connect to a network router or switch for accessing the Web UI or control via an IP based control system.
RS-232
9-pin DB9 Female
Connect to an RS-232 control system to control the matrix or a PC for testing and firmware updates. See
RS-232
Wiring.
HDMI Out
19-pin type A HDMI female:
MX-0404-H2: 1-4
MX-0606-H2: 1-6
Supports HDMI and DVI/D (requires adapter-not included).
IR Ext
3.5mm (1/8in) Stereo Jack
Connect to an Included IR receiver or control system to control the operation of the matrix.
See
IR Ext (Receiver) Wiring
.
EDID
3 Position Dipswitch:
Used to set EDIDs to correct resolution conflicts between the source and the display.
See
EDID Settings.
Copyright © 2015 WyreStorm Technologies |
wyrestorm.com
MX-0404-H2 | MX-0606-H2 Quickstart Guide | 160722
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
2 of 4