background image

 

Setup   Menu   /   Instructions 

To   enter   the   setup   menu   proceed   with   the   following   steps: 
 

1.

Make   sure   the   unit   is   plugged   in,   power   switch   on   rear   is   on,   and   the   unit   is   off.

 

2. Push   and   hold   in   the   Input   up   and   down   buttons   while   pressing   the   power   button   (knob)   once.

 

3. Release   all   the   buttons   when   the   setup   screen   shows   up   on   the   display.

 

4. Use   the   input   up   and   down   buttons   to   navigate   the   menu   function.

 

5. Use   the   mute   button   to   select   and   enter   the   menu   function.

 

6. Use   the   volume   knob   to   change   the   setting   with-in   the   menu   function.   

 

(You   can   press   the   input   buttons   to   save   the   settings   and   move   to   another   function)  

7.

Once   all   settings   have   been   made,   press   the   power   button   again   (knob)   to   set   and   store   your   selections.

 

 
When   selecting   the   HT   Bypass   input,   make   sure   that   the   proper   input   is   selected   which   is   connected   to   your   HT 
processor.   When   the   trigger   is   applied   after   this   setting   is   made,   the   unit   will   automatically   select   that   input,   set   the 
volume   to   -0db,   and   turn   on   other   connected   equipment   via   the   DC   trigger   output.  
 
When   the   Loop   out   feature   is   used,   Aux   out   becomes   the   loop   out   which   will   feed   the   connected   components   input, 
and   Input   5   will   become   the   loop   in   which   will   come   from   the   output   of   the   connected   component.   Please   note:   the 
loop   in   connectors   are   directly   connected   to   the   internal   amplifiers   as   if   the   unit   was   a   standalone   amp   with   27db   of 
gain.   The   loop   out   is   controlled   by   the   volume   control,   but   the   loop   in   is   not.   Make   sure   you   have   all   connections 
made   properly   to   ensure   no   damage   is   made   to   your   equipment. 
 

Powering   Your   STI-v2

 

When   power   is   applied   to   the   STI-v2   and   the   switch   located   on   the   rear   is   in   the   on   position,   the   STI-v2   will   turn   on. 
If   you   would   like   to   manually   turn   the   amplifier   on   and   off,   this   switch   is   where   you   would   want   to   do   so.   Leaving 
your   amplifier   on   all   the   time   will   not   hurt   it,   shorten   the   lifespan,   or   degrade   the   future   sound.   The   STI-v2   series 
amplifiers   make   zero   noise   internally   and   to   connected   gear.   The   unit   shouldn’t   be   in   any   way   noticeable   of   its 
operation   other   than   the   display   status   on   the   front   panel.   To   prevent   power   surges,   we   recommend   using   quality 
surge   suppressor   equipment.   Turning   the   switch   off   on   the   rear   of   the   unit   will   also   protect   against   surges   and   spikes 
should   some   occur   without   proper   protection. 
 

DC   Trigger 

The   STI-v2   series   stereo   amplifiers   are   equipped   with   a   12VDC   remote   trigger   input   and   output.   You   can   connect   the 
12V   trigger   output   of   your   processor   or   source   to   the   12V   trigger   input   on   the   amplifier   for   an   easy   remote   power   up 
and   HT   configuration   every   time.   When   the   unit   is   in   standby   via   the   remote   trigger,   the   amplifier   is   powered   up,   but 
disabled.   The   current   draw   in   standby   mode   is   less   than   10W   per   channel,   and   shouldn’t   measure   too   much   on   your 
electricity   bill.   The   trigger   input   will   work   from   5-25V,   so   there   shouldn’t   be   any   issue   with   the   voltage   tolerance   on 
source   equipments   outputs   rated   for   12V.   You   can   also   connect   the   trigger   output   to   additional   amplifiers   or 
equipment   to   be   turned   on   and   off   with   the   STI-v2   amplifier. 
 

 

©   Wyred   4   Sound.   All   rights   reserved.  

STI-v2   Manual   v1

 

 

Содержание STI-1000 v2















Отзывы: