Getting Connected
⚠
CAUTION: Disconnect the power cord or turn the rear switch off before making connections to the DAC. Doing so
will minimize any risk of equipment damage.
1.
DC trigger in/out
For details on configuration and usage, see “Remote Control/DC Trigger” section.
2. Rear power switch
Turn the switch on to supply power the DAC, off to disconnect power.
3. Digital inputs
Toslink inputs are tested up to 24 bit/192 kHz, coaxial inputs can receive up to 200 kHz. The USB and I²S
inputs are capable of up to 32 bit/384 kHz PCM files as well as DSD 256.
4. AC input
Use supplied power cable or your own. Be sure to observe proper voltage and grounding.
5. Right analog outputs
Connect to the right input of your preamplifier or amplifier. XLR and RCA cables are acceptable.
6. HT Bypass inputs
The inner RCA jacks are HT Bypass inputs (not outputs). For details, see “Remote Control/DC Trigger” section.
7.
Left analog outputs
Connect to the left input of your preamplifier or amplifier. XLR and RCA cables are acceptable.
7
© Wyred 4 Sound. All rights reserved. DAC-2v2 & DAC-2v2SE Manual v2
