Connectivity (see next page for diagrams)
The bLINK is very easy to insert into and enjoy with your existing audio system. It can be used simultaneously
as a Bluetooth wireless device and a wired connected device (via coax cable). Use the Input Select switch to
toggle between the two inputs.
To use in wireless (Bluetooth) mode:
1. Attach the included antenna and plug the the bLINK into a wall socket with the included power supply.
2. Connect the bLINK to your DAC via the COAX OUT or OPTICAL OUT outputs.
3. Turn unit ON using the Power switch
4. Set the Input Select switch to “ ” for Bluetooth
5. Ensure your streaming device (phone, tablet, etc.) is on and has Bluetooth enabled.
6. Push the Push to Pair button on the bLINK for 2 seconds. The white “W” logo on top of the bLINK will
slowly blink blue.
7. Briefly push the Push to Pair button again. The “W” will blink rapidly. The bLINK is now in pairing mode.
8. In a few moments, “Wyred 4 Sound bLINK” should appear on your device's Bluetooth list. Add/accept if
needed. When the bLINK is successfully paired, the “W” will blink slowly again.
9. When you start playing music from your streaming device, the “W” will glow a steady blue.
Some notes on wireless setup and use:
■
When you stop playing music or unpair your streaming device, the “W” will blink to indicate it is still
on, but not playing any music. After a period of time, the “W” will stop blinking and revert to white.
This indicates the unit is in sleep mode. The device will automatically wake up when you start playing
music again. If the time period has been too long, re‐sync the device by holding in the Push to Pair
button for 2 seconds.
■
The antenna on the bLINK is removable. This is to accommodate different antennas should you require
a different one (ie a more powerful one). The included antenna has been tested to be usable up to a
distance of ~30 feet, unobstructed. Contact us to inquire about an antenna upgrade should you need
broader range.
To use in wired mode via Coax input:
1. Plug the the bLINK into a wall socket with the included power supply.
2. Connect the bLINK to your DAC via the COAX OUT or OPTICAL OUT connections.
3. Connect your streaming device to the bLINK via the COAX IN input.
4. Turn the bLINK ON using the Power switch
5. Begin playing music. (when “W” on top of unit is lit, the bLINK is locked on the signal)
See next page for diagrams.
Page 2 of 8
