Wylie Power Sprayer Series, Руководство оператора и каталог запасных частей

Страница: 17 / 30

13
Maintenance
Strainer Maintenance
From time to time it may be necessary to clean the strainer
of debris that has collected. Low pump pressure and
volume is an indication that the strainer is clogged and
needs cleaning.
Figure C1
Removing Strainer
With the engine shut off, close the suction ball valve and
remove the strainer bowl. Empty and rinse the bowl and
clean the screen as needed. Make sure the O-ring that
seals the bowl to the base is not lost when the bowl is
removed. Firmly hand tighten the bowl to the base and
open the suction ball valve.
Engine/Pump Maintenance
The engine and pump each has an owner’s manual printed
by the respective manufacturer that has been included
with this manual. If you did not receive a pump or engine
manual, contact Wylie Customer Service at 888-788-7753
to request a manual.
Refer to the manufacturer’s manual for recommended
service and maintenance.
Spray Tank
The spray tank may be manufactured from either natural
white or “algae resistant” black resin. If water only is to be
sprayed from a white tank it may be necessary to add a
small amount of bleach to the tank to prevent the growth of
algae which will discolor the interior of a white tank.
Maintenance