Wylie Arena Express water wagon, Руководство оператора и каталог запасных частей

Страница: 18 / 38

14
Bolt the hose reel to the mounting plate with ½”x1” bolts.
Insert the bent pull pins in the swivel bracket.
Bolt the handle to the reel arm. Apply thread sealant to the
hose threads and screw into the hose reel fitting. Roll the
hose onto the hose reel. Attach the fire nozzle. Lock the
hose reel in position with the spring loaded lock pin.
The Express Water Wagon can be equipped with a stan -
dard pump with a 4 hp engine or a high pressure pump
with a 5.5 hp engine. Choose the plumbing instructions
depending of the pump your unit is equipped with.
Optional Hose Reel
Optional Hose Reel
The Express Water Wagon can be fitted at the factory or
as an aftermarket option with a hose reel for a 1” hose
and fire nozzle.
Aftermarket Set-up
Loosely attach the crossmember to the frame just below
the hose hangers. Set the A-frame on the trailer frame and
under the swivel frame. Attach the A-frame with U-bolts.
Mark holes through the A-frame mount brackets. Drill ½”
holes through the trailer frame. Secure the A-frame mount
brackets with the ½”x1” bolts. Tighten all mounting bolts.
Set the hose reel mounting plate in the swivel bracket with
a nylon washer above and below the swivel frame. Se -
cure with the ½”x4½” bolt.
Crossmember > < Hose Hanger
< A-Frame
< Swivel Frame
< A-Frame Mount Bracket
½”x1” Bolts >
Figure B19
Hose Reel Frame Mounting
Figure B20
Hose Reel Mounting Plate
< Nylon Washer
Swivel Frame >
< Hose Reel Mounting Plate
< ½”x4½” Bolt
Figure B21
Hose Reel Attached to Mounting Plate
< Hose Reel
Reel Mounting Plate >
Bent Pull Pin >
< Reel Handle
1”x50’ Hose Assembly >
Fire Nozzle >
Figure B22
Rolling Hose on Hose Reel
< Lock Pin
< Nylon Washer