Wybron NEXERA 2560, Руководство пользователя

Страница: 12 / 27

12
Attaching Accessories to the Front Holder
Nexera can accept up to two standard accessories.
(7.5” for the wash, 6.25” for the profile) Accessories
are safely held in place with a standard spring-loaded
latch.
 From the front of the fixture push the accessory
retaining latch to the right.
 After the latch locking pin clears, move the latch
up.
 Load the accessory then push the latch to the right
and down to hold the accessory in place. The
spring will engage the locking pin in the fixture.
Connecting AC Power
Be sure the fixture is properly
grounded. Don’t touch the sparky
parts.
Use a good source of AC power that complies with local building and electrical codes and
has both overload and ground fault protection. If the Nexera fixture was received without
an AC lamp cord plug attached, attach the appropriate lamp cord plug according to the
following code:

green – ground/earth

gray – neutral

gray – line
Be sure that the AC power source is appropriate for the lamp being used.
Adjusting Field Angle
Field angle can be adjusted on the Nexera wash light.
 Loosen the Fresnel adjustment knob.
 Move the Fresnel back to increase field angle, or
forward to reduce the field angle.

Tighten the Fresnel adjustment knob to secure
desired field angle.
Retaining
latch
Accessory
holder
Fresnel
adjustment
knob