8
Introduction
The PS-150, PS-300 and PS-600 are Wybron’s new RDM compatible Power Supplies.
The power supplies work with their compatible devices, allowing you to control the fan
speed (where applicable) via one or multiple DMX channels on the lighting console.
Plus, the compact power supplies attach easily to the truss of the lighting rig or mount
into a 19-inch rack.
System Components
Power Supply
The power supply passes the DMX512 signal level from the lighting console and then
sends to each device along with 24 volts DC. The DMX512 control signal from the
lighting board is connected to the power supply and can continue on to more power
supplies or other DMX-controlled devices. The power supply sends both power and
control signal on a single cable eliminating the need for a separate power cable for each
device attached.
Caution: The PS Power Supply is currently only compatible with
Forerunner and NexeraLX. DO NOT connect PS Power Supplies to
RAM/ColoramII devices (ColoramII, CXI, GoboramII, or Eclipse) and DO
NOT connect Forerunner or NexeraLX to RAM/Coloram II Power Supplies.
Damage from such action will not be covered by the equipment warranties
.
Compatible Devices
At the time of printing of this manual, the PS-150, PS-300 and PS-600 Power Supplies
are only for use with the following devices:
•
Nexera LX
•
Forerunner color changers
Refer to the Nexera LX or Forerunner user manuals for detailed operating information
on these products. More products will be compatible in the future.
To operate Forerunner:
The maximum amount of cable per power supply output is 350
feet. The maximum number of color changers per power supply output is eight (8).
Power/Data Cable
The Power/Data Cable connects the Power Supply outputs to the connected devices
and provides them with power and control signal. The cable uses 4-pin XLR connectors
on either end and consists of two 14 AWG conductors and a 22 AWG twisted, shielded
pair.
Содержание 20150
Страница 1: ...User Manual Power Supplies ...
Страница 3: ...3 ...