1
1. Easy way to start the device
1.1 Operating steps and instructions
1.1.1 Air system
Ø
Install the antennas.
Ø
Install the HDMI camera cable.
Ø
Connect camera to the power, select the correct video format.
Ø
Connect air system to the power.
There should be below instructions if the air system works well.
WORK light flash regularly.
HDMI light turn-on
LINK light turn-on if the air system connect to ground system.
1.1.2 Ground system
Ø
Install the antennas
Ø
Install the monitor by HDMI cable. (optional)
Ø
Turn off the ground system power button, then connect to the power (battery of 12V-DC power), turn
on the ground system power button again.
Ø
Turn on the power.
There should be below instructions if the ground system works well.
WORK light flash regularly
HDMI light turn-on(if installed the HDMI monitor).
LINK light turn-on if the air system connect to air system.
HDMI monitor instruction (if installed the HDMI monitor):
The monitor shows logo "R2TECK" after ground system connect to the power.
After that, the monitor shows progress bar: Start-up / Selfcheck / Link.
Monitor real-time display the camera video when the air system connect to the ground system.
1.1.3 Mobile
Ø
The mobile connect the wifi network "R2TECK_DVL1", WIFI password "12345688"
Ø
wait for connecting
Ø
Run the APP (if the APP is already running, turn off it first then run again)
Ø
The mobile real-time display the camera video, the MOBILE light on the ground system turn-on.
Attention: Currently only allow working one mobile, if want to change the mobile, please follow below process:
Disconnect the mobile with ground system wifi network.
Wait ground system MOBILE light turn off.
Repeat the above 4 steps.
IOS App installation: In App store, search the key word
“
r2teck
”
and download.
