Wurth Elektronik AMB2621, Руководство пользователя, Страница: 88 / 192

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-II
8. UserSettings - Module configuration values
The settings described in this chapter are stored permanently in the module’s flash memory.
Depending on their corresponding permissions, their current values can be read out by the
CMD_GET_REQ
command or modified by the
CMD_SET_REQ
command. To do so the corresponding
settings index is used, which can be found in the primary table of each setting description.
These settings cannot be accessed (read, write) from the Peripheral only mode introduced in
a follow-up chapter.
The validity of the specified parameters is not verified. Incorrect values can
result in device malfunction.
After the modification of the non-volatile parameters, a reset will be necessary
for the changes to be applied.
8.1. FS_DeviceInfo: Read the chip type and OS version
Settings
index
Designation
Permissible
values
Default value
Permissions
Number
of
Bytes
15
FS_DeviceInfo
- -
read
12
This setting contains information about the chip type and the OS version. The value of
FS_
DeviceInfo
is composed of the following 4 sub parameters (ordered by appearance in the
response):
OS version Build code Package variant Chip ID
2 Bytes 4 Bytes 2 Bytes 4 Bytes
OS version:
0x00A8 : Softdevice S132 6.0.0
Build code:
• ASCII coded (see the following table
47
)
Package variant:
0x2000: QFN
Order code 2608011x24010
86
Version 1.11 , July 2022 www.we-online.com/wcs