Würth PINPULLER SPOT, Оригинальная инструкция по эксплуатации

Страница: 13 / 40

13
Technical Data
Main supply 230 V, 50 Hz
Capacity rating at 50 % 2 kVA
Normal rating at 100 % 1.4 kVA
Max. input short circuit current 50 A
Max. output short circuit current 1600 A
Heating current at 100 % 200 A
Idle speed output voltage 7 V
Insulation class F
IP Rating IP21
Mains cable/stipulated extensions L
overall
≤ 15 m, L
overall
= 30 m 2.5 mm², 4 mm²
Required mains supply protection Plug 16 A
Fuses (gG) Slow fuses (aM)
Circuit breaker (characteristic C)
16 A
16 A
Noise level < 70 dB(A)
Vibration level < 2.5 m/s²
Dimensions 285 × 180 ×320 mm
Weight 16 kg
Intended use
The device is intended solely for the welding on of
pulling members (e.g. PinPuller
®
electrodes) and for
panel pulling with the carbon electrode on vehicle
panels. Any other use or use outside this scope is
considered improper use.
The user alone is responsible for damage
resulting from improper use.
Device elements
Overview [Fig. I]
1 Display
2
"
+
"-/"
-
“ key
3 Dent killer connection socket
4
Dent killer power socket
5 Welding gun power socket
6
Earth connection power socket
7 Welding gun connection socket
8
Arrow keys
9 Power switch
10
Mains lead
Start-up
Attention !
Do not connect the device to standard low voltage
leads for household power supplies!
Observe the information of the device’s type plate
and the technical data.
▸
Position the device on a level surface.
▸
Plug in the mains plug.
▸
Insert the mains cable plug in the earth connec-
tion power connector
[6]
and lock by turning
clockwise.
▸
Clamp the copper shoe of the earthing cable on
to the body part being worked on.