Würth EWS 10-125 Compact, Руководство пользователя

Страница: 28 / 344

28
Quick-clamping nut
(depending on configuration)
Tightening the quick-clamping nut
Attention!
Use the quick-clamping nut [9] only on machines
with “quick-clamping system”.
Attention!
If the abrasive wheel [10] is thicker than 6.8 mm
in the clamping area, the quick-clamping nut must
not be used!
¾
Use the two-hole nut [8] with two-hole
wrench [7] .
■
Lock the spindle.
■
Push quick-clamping nut
[9]
onto the
spindle [12] so that the two lugs engage in the
two grooves of the spindle.
■
Tightening the quick-clamping nut in clockwise
direction by hand.
■
Tighten the quick-clamping nut further by turning
the abrasive wheel firmly in clockwise direction.
Loosening the quick-clamping nut
Attention!
Only when the quick-clamping nut [9] is fitted
may the spindle be stopped using the red spindle
locking knob [13] !
■
The machine runs on after switching off. Just
before the abrasive wheel comes to a standstill,
press the red spindle locking knob [13] .
3
The quick-clamping nut [9] is loosened automati -
cally by approx. half a turn and can then be
unscrewed without additional force or tools.
Operation
Setting the spindle speed (depending
on configuration)
■
Set the recommended spindle speed at adjust -
ment wheel
[2]
.
— (Small number = low speed;
large number = high speed)
• Cutting and roughing wheel, grinding brush,
diamond cut-off wheel: high speed
• Brush: medium speed
• Grinding disc: low to medium speed
Information
We recommend the use of our angle
polishers for polishing work.
Switching ON/OFF
WARNING!
Risk of severe injuries.
¾
Always guide the machine with
both hands.
¾
First switch on, then bring the
attachment into contact with the
workpiece.
WARNING!
Danger of unintentional starting
¾
Always switch off the machine
when the mains plug is removed
from the plug socket or if a power
failure has occurred.
DANGER!
Risk of a dust explosion.
¾
Take care to prevent the machine
from drawing in additional dust
and chips.
¾
Keep away from dust deposits
when switching the machine ON
and OFF.