HMS-G3
Product information
HMS-G3_PI_2014-09_EN
Subject to technical changes
Page 3 of 4
Circuit diagram
Installing
WARNING! Danger to life from electric shock!
Switch off the power to the entire plant before installing. Otherwise, an external
voltage may still be present even though the control voltage is switched off.
Installation in the MGR
Installation with ZEM
Installation in the installation frame MGR131/141
Push the device in the installation frame to the stop until it
locks between the spring clips.
Note!
•
Please observe the product information for
the MGR131/141 module frame.
Individual installation with screw clamps of the ZEM
type
Insert the device up to the stop in a mounting cutout in the
switch cabinet door. Then fix the device with screw clamps
of the ZEM type to the switching cabinet door.
