DCC-XP V6
Rack control
with integrated condensation pressure control
Page 2 of 4
Subject to technical changes
DCC-XP_V6.5.0_PI_2021-08_EN
Writing conventions
Symbol
Meaning
CAUTION
Avoid the described hazard: otherwise
minor
or
medium
physical
injury or damage to property will result.
WARNING
Avoid the described hazard: otherwise there is danger from
electric
voltage
that could lead to death or
serious
physical injury.
For your safety
For safe operation and to avoid personal injury and equipment damage through operator
error, always read these instructions, become familiar with the device, and follow all safety
instructions on the product and in this document, as well as the safety guidelines of Wurm
GmbH & Co. KG Elektronische Systeme. Keep these instructions ready to hand for quick
reference and pass them on with the device if the product is sold.
Wurm GmbH & Co. KG Elektronische Systeme accepts no liability in the case of improper
use or use for purposes other than the intended purpose.
Target group
These instructions are intended for “service technicians”.
Intended use
The DCC-XP is a rack control with integrated condensation
pressure control.
WARNING
Danger to life from electric shock and/or fire!
Switch off the power to the entire plant when carrying out installation, wiring or
removal work. Otherwise a mains voltage and/or external voltage may still be
present even if the control voltage is switched off. Always remove both power
plugs (L and N).
The wiring of the device must be carried out only by qualified electricians.
Use only the correct tools for all work.
Check all wiring after connection.
Take note of the maximum loads on all connections.
Never expose the device to moisture, for example due to condensation or
cleaning agents.
Take the device out of operation if it is faulty or damaged and is therefore
compromising safe operation.
Do not open the device.
Do not repair the device yourself. If the device requires repairs, send it in with
an exact description of the fault.
Wurm Infocenter
paperless info
Software revisions and validity of documentation
Software version
V6.5.0 2021-08
Documentation status
Any software versions not listed are special solutions for individual projects and are not described in detail in this
document. This document automatically ceases to be valid if a new technical description is issued.
Manufacturer:
Wurm GmbH & Co. KG Elektronische Systeme, Morsbachtalstraße 30, D-42857 Remscheid. See
