DCC-XP V6
Rack control
with integrated condensation pressure control
DCC-XP_V6.5.0_PI_2021-08_EN
Subject to technical changes
Page 1 of 4
Front view
Features
4 capacity steps for different compressor types:
- Equally or unequally graduated compressors
- 1-, 2- or 3-step compressors
- With or without cylinder lift
- Same compressors with a constant compressor via CFU
Extendable by 4 capacity steps with one additional DCC-XP
Compressor downtime monitoring and rack downtime monitoring
Base load change according to run time and switching frequency
Operating hours counter for each compressor step
Peak load shedding and Fastreturn
Operating mode for controlling compressor output through voltage input
Suction pressure increase through switch contact
Constant condensation pressure control by speed regulator or ADC multiple
contact switch
Cyclical forced start-up for condenser fans
Peak load limiting
Temperature sensor TRK277/7 PLUS for outside temperature guided
condensation setpoint, for suction gas monitoring or temperature
documentation, with/without failure monitoring as desired
Display of current operating status of the refrigeration plant
Direct connection of a CAN-USB to the service socket
Connection to the Wurm system via Wurm CAN communication bus (C-BUS)
and FRIGODATA XP
