Wurlitzer OMT F91, Руководство по эксплуатации

Страница: 36 / 44

Selective disabling of tracks
OMT CD – Edition: 13.08.2007
34
10.2 Selective disabling of tracks
You can disable up to maximum 25 different tracks of different CDs. If somebody selects a disabled
track the digital display flashes. This indicates that this track is not selectable.
To disable tracks (service program, level 2):
1.
Set the slide switch ‘service’ at the SCC-unit to ON.
2.
Press ‘LT’ button.
3.
Press selection button 4 -hold down- and press selection button R then release both buttons.
Service level 2 is reached. Display is dark
4.
.Press selection button 4, the display shows e.g.:
#
A = CD number
#
B = track number
Each operation of selection button 4 shows the next disabled track,
maximum 25 tracks. After having reached the last disabled track, the first
one is displayed again. If the display shows 0000 after the first button
operation no track is disabled.
To programme:
1.
Press selection button 4 and selection button R at the same time.The digital display goes
dark.
2.
Enter first the number of the CD to be disabled followed by the track (total four digits).
3.
To disable the next CD/track, press selection button 4 as often as display shows 0 0 0 0 .
4.
Press selection button 4 again - hold - and press selection button R. The digital display goes
dark. Then enter CD and track to be disabled.
5.
Continue programming for the next track with step c.
To enable a disabled track:
When a track is displayed, press button 4 - hold - and press selection
button R and enter first the number of the CD followed by 0 0. To enable all disabled tracks enter 0
0 0 0 (4 times 0).
A
B