Installation manual for LED rear indicator FTR 1200 S from 2019
• Revision: 01 • 08.04.2020 •
© ABM Fahrzeugtechnik GmbH
Page 4 of 6
Guide the cables of the indicator over or through the
rear the frame (drilling Ø 4 mm).
Connect the indicators and resistors supplied...
... according to the diagram (see last page).
Note: If necessary, use the provided flat plugs for the
connection of the number plate light.
Caution: Cables and their connections should always be
protected with heat-shrink tubing!
Description of the heat-shrink solder connectors
The tin is melted by the heat of a heat gun and a secure
contact is ensured. Furthermore, the connector shrinks with
inside adhesive and thus ensures impermeability. The
transparent heat-shrink tubing enables a visual control of the
connection.
