Installation manual for Triumph Bonneville Bobber
• Revision: 00 • 03/12/2017 •
© ABM Fahrzeugtechnik GmbH
Page 11 of 16
…it can be screwed onto the brake cylinder using the
banjo bolt and seals provided.
Caution: Lay the brake line so that there is sufficient
distance to the downpipe.
Torque 22 Nm
Bleed the brake system according to the workshop
manual.
Lay the cable harnesses of the new brake light switch and
the original cutted cable harness as illustrated behind the
coolant reservoir.
Reattach the coolant reservoir, making sure that the ring
cable lug of the provided ground cable is attached on the
right side under the lock nut.
Mount the relay onto the holder where the original brake
fluid reservoir was attached.
Trim both cable harnesses as required.
Connect the complete electrical system according to the
diagram (see drawing) using the provided cable lugs.
Attach the baseplate.
Torque 38 Nm