WUNDER SA.BI.SRL EN USER MANUAL
BABY02 (WU150) REV.02 10/01/2017 11
8. PRINTER FUNCTIONS
Weight can be printed for records using RS232 interface cable.
After weighing simply press PRINT key to print out the results.
The format presented below is the standard format of results print-out and cannot be changed.
More informations: [email protected] or
Set parameters of the scale interface on the connected
device. It is not possible to change the scale parameters.
Baud rate: 9600 bps
Parity check: None
Data length: 8 bits
Stop bit: 1 bit
Handshake: RTS/CTS
Data code: ASCII
Serial RS232
Connecting with PC
Start Hyper Terminal
Start Hyper Terminal program from clicking
Sta
rt Menu → Programs → Accessories → Communication → Hyper Terminal.
New Connection Description
Give new connection a name then click OK.
Select Your COM Port
Click Connect to select your COM port. Usually there’s only one option for select. Then click OK.
Port Settings
Click Bits per second to set up rate at 9600, Data bits at 8, Parity at None, Stop bits at 1 and Flow control at
Hardware. Then click OK to complete your setting.
Output Data
When press the PRINT key to output data from scale to PC or an Optional Printer.
Instruction for charging and connecting
PIN
SIGNAL
2
TX
3
RX
5
GND
Connector RS232
GROSS WEIGHT 10.00kg
TARE WEIGHT 1.00kg
NET WEIGHT 9.00kg
29/12/2008 17:00
