Operating instructions.
Insert our reamer fully into the end of the
pipe so that the pipe is in contact with the
three cutting teeth.
Push and turn the reamer in a clockwise
direction 2-3 full turns, this will give the end of
the pipe a chamfered finish ready for
connection to the manifold.
A good tip is to grip the pipe wearing a
rubber glove, this will stop the pipe twisting
in your hand.
2
Once cut with cutters, the end of the floor
pipe must be prepared using our reamer
before connecting to the manifold.
Pipe Reamer
T02
Pipe Cutter & Reamer User Guide
✆
0800 083 2677
www.wundatrade.co.uk
...a division of
WUNDA GROUP PLC
WUNDA
TRADE