1
RTS80.70 programming timer switch
With this weekly timer, It is possible to set 6 individual on/off events per day which can be copied for all 7 days
or you can have days 1-5 the same with a different schedule for the weekends. Factory settings are programmed
for 3 events to obtain 6 you will need to set up the program by following the advanced settings information .You
can also select the
permanent “manual override mode”
or the
single event “comfort mode”
. The timer
switch is recommended for using together with a mechanical thermostat & the wiring box H-Box12.
Manual override mode
When the clock symbol is showing the timer on and off
cycles are automatically controlled
To override and gain manual control press the
menu button until the hand symbol appears.
The timer is now under permanent manual control.
Press to turn the appliance controlled by the
timer manually on/off.
The timer has the facility to operate 6 on and 6 off
events. Factory settings provide the popular 3 on and
3 off combination. Press the menu button until
the clock symbol appears. The timer will now
automatically operate according to the Factory
programmed settings.
Press key for 5 seconds until the day starts blinking,
use the or key to set the day, press the key
to confirm the setting and the hours will start blinking,
use or press to confirm the setting and the
minutes will start blinking, use or to set the min-
utes, press to confirm. The timer will return to normal
working.
Single period manual override
“comfort mode”
You can change from automatic to manual control
for a single period ONLY when the clock symbol is
showing. Press or and the hand symbol will appear
alongside the clock symbol. Press again and the
heating symbol will appear or disappear. The timer will
reset to auto mode at the next event
.
Key lock function
Press the key to switch on or to switch off the timer.
Press both the and together for 5 secs to engage/
disengage the key lock function. If the key lock symbol is
visible the function is ON if has disappeared it is OFF.
on/off
Function
Setting the clock
Clock controlled program mode
Clock controlled programme mode
The timer has the facility to operate 6 on and 6 off heating
events. Factory settings provide the popular 3 on and 3 off
combination. Press the menu button until the clock
symbol appears. The timer will now automatically operate
according to the Factory programmed settings.
Manual override mode
When the clock symbol is showing the programmed timer
on and off cycles are automatically controlled.
To override and gain manual control press the menu button
until the hand symbol appears.
The timer is now in manual control. Press to turn the floor
heating manually on/off.
Single period manual override
“comfort mode”
You can change from automatic to manual control for a single
period, ONLY when the clock symbol is showing. Press or
and the hand symbol will appear alongside the clock
symbol. Press again and the heating symbol will appear or
disappear. The timer will reset to auto mode at the next
heating event.
Key lock function
Once the timer has been set, press both the and buttons
together for 5 seconds to display . Timer is now locked.
Repeat these steps to unlock the timer.
On/Off
To turn timer switch on or off, press button.
Set day of the week and the time
Press button for 5 seconds until the day starts blinking, use
the or button to set the day, press the button to confirm
the setting and the hours will start blinking, use or press
button to confirm the setting and the minutes will start blinking,
Manual mode
Clock controlled
programme mode
Heating on
Key lock
On/Off Button
Arrow Buttons
Menu Button
Day of the
weeknumber
Time display
Heating
event indicator
With this weekly timer, It is possible to set 6 individual on/off heating events per day which can be copied for all 7 days or
you can have days 1-5 the same with a different schedule for the weekends. Factory settings are programmed for 3 heating
events to obtain 6 you will need to set up the program by following the advanced settings information .You can also select
the
permanent “manual override mode”
or the
single event “comfort mode”
. The timer switch is recommended for using
together with a mechanical thermostat & the wiring box H-Box12.
Function
use or to set the minutes, press to confirm. The timer
will return to normal working.
E01
RTS80.70 Programming Timer Switch
✆
0800 5420 816
www.wundatrade.co.uk
THE BRAND YOU CAN TRUST
Revision date: 30/4/2018
