Wuhan Huazhong Numerical Control Co., Ltd HNC-18iT, Руководство по программированию

Страница: 130 / 145

11. Custom Macro
126
#1095 “origin C of G59”
#1096 “origin U of G59”
#1097 “origin V of G59”
#1098 “origin W of G59”
#1099 reserved
#1100 “break point X”
#1101 “break point Y”
#1102 “break point Z”
#1103 “break point A”
#1104 “break point B”
#1105 “break point C”
#1106 “break point U”
#1107 “break point V”
#1108 “break point W”
#1109 “axis of the coordinate system”
#1110 “middle point X of G28”
#1111 “middle point Y of G28”
#1112 “middle point Z of G28”
#1113 “middle point A of G28”
#1114 “middle point B of G28”
#1115 “middle point C of G28”
#1116 “middle point U of G28”
#1117 “middle point V of G28”
#1118 “middle point W of G28”
#1119 “shield of G28”
#1120 “mirror-image position X”
#1121 “mirror-image position Y”
#1122 “mirror-image position Z”
#1123 “mirror-image position A”
#1124 “mirror-image position B”
#1125 “mirror-image position C”
#1126 “mirror-image position U”