WUBEN T101PRO, Руководство пользователя

Страница: 5 / 8

E
N
- 05 -
Output selections: When the light is on, single click on
switch to cycle through Eco-Low-Med-High-Turbo.
2
Plug the charging cable and click the tail switch until the
indicator is red light constant on. When the indicator beneath
the switch is blue light constant on, it indicates charging
finished, please click on the switch again and unplug the
charging cable.
Note: Indicator is beneath the side switch, red light constant
on indicates charging, blue light constant on indicates
charging finished. If one of the batteries is full while the other
is not, it will be blue light flashes. If abnormal charging, it will
be blue light and red light flash alternately. Please use 5V/2A
adapter, it takes about 4 hours to fully charge the flashlight.
4. Charging
Instant Turbo: Press and hold switch for 1s to activate
instant Turbo, release to return to the previous status.
3
Flash mode: Double click on switch to swap between
Strobe and SOS, and single click to return to the previous
status.
4
Make sure the batteries with protection circuit board.
Make sure rubber cap covered well after charging finished to promise
the IP68 waterproof level.
Blue light constant on (off after 5s)
Power 30%~15%
Power 100%~31%
Power under 15%
Red light constant on (off after 5s)
Red light flashes
5. Battery status indication